Pressure Wash Your House - Tips and Techniques

Power washing or pressure washing is the only practical way to remove sludge, and mold from your house. To get the most out of a paint job you will want to pressure wash your house as well. this gives the paint a good clean surface to adhere to. Although the term is pressure wash you really do not use much pressure when it comes to your homes siding. Only low pressure is used, around 300 psi. Some contractors are ignorant of this and will try to use high pressure and this can be very dangerous as it likely will cause damage. Before hiring a contractor this should be your first question to them.

Almost all siding material can benefit from pressure washing. Hardy plank, brick, vinyl siding and aluminum will all benefit from a good cleaning from time to time. Caution should be applied when cleaning soft materials like wood but if low pressure techniques are employed then little damage is possible. Cleaning agents will need to be applied based on the type of material your exterior is made of. For most materials a mix of bleach and house cleaner will do the trick. For wood you will need to use a special cleaner that will brighten the wood and not strip out the color. All the necessary cleaning materials can be found at your local hardware store.

House

For a do it yourself pressure washing job, you can obtain a unit from a rental equipment store. The cost is around per day. It is not necessary to get a heavy duty unit as you will be using low pressure to clean the house. A unit with up to 1500 psi is all you need. Although the unit can sustain 1500 psi you will want a house wash tip that will reduce the pressure. This is accomplished by using a tip with a larger opening which lowers the pressure and allows more volume to flow through the hole.

Pressure washers will have a 'down stream' function which sucks up the cleaning agent and mixes it with the water as it flows through the unit. Generally you will fill a 5 gallon bucket with the necessary detergent or bleach and a small hose attached to the unit is put into the bucket. Once the water begins to flow through the system, a suction develops and draws the cleaning product up and sprays it out with the water at a 1-5 to 1-7 ratio.

If using bleach to clean mildew and mold a 100% bleach solution is added to the bucket. For other cleaners you will need to consult the instructions. Be sure to remove anything from around the house that might be damaged by the bleach. A quick rinse of the flowers and shrubs usually is all that is needed to insure no plants suffer.

The best way to actually clean your house is to start at a corner. Slowly work your way across to the other end of the house. As you go spray the stream of water down at the bottom of the house and work your way up to the eves of the roof. Always work from the bottom up, this will reduce the chance for streaks to appear. Be sure to saturate every inch of the side you are working on.

If you do not then you will have spots where the bleach and cleaner did not touch. Once you get to the end of the house you will need to pull the 'down streaming' hose out of the cleaning solution bucket and go back over the side of the house again, this time with only clean water coming out the hose. Thoroughly rinse the siding. You should now be done with that side of the house. Put the 'down streaming' house back into the solution bucket and begin the next side of the house.

You will want to get close enough to the wall that you can get the solution on every inch of the siding. If you get too close then a good bit of the spray will drip down on your head, so don't get too close. Be careful not to spray in areas that are open and get water inside the house. Also be careful not to spray windows if the pressure is very high. Never get on a ladder to reach high spots. It is much to dangerous to work with a pressure washer and try to balance on a ladder. Remember, this is extremely high pressure, so never point the nozzle at anyone and be sure to wear safety glasses. Of course, never spray water around electrical wires.

Protect any plants, light fixtures, or other breakable objects around the house with plastic bags, duct tape, and drop cloths. Move obstacles and outdoor furniture away from the house. A pressure washing unit is no toy. Be sure to wear safety glasses and do not underestimate the power of water. Never point the wand at anyone at any time. Cleaning your house with a pressure washer is not very hard and will result in a nice shiny house you will be proud of.

Pressure Wash Your House - Tips and Techniques

For more information on what type of pressure washers to get or how to pressure wash other parts of the home see the link below.
For more information on pressure washing and pressure washers like Husky pressure washers check out our site.

Largemouth Bass Fishing Techniques - Early Spring Bass Fishing!

Spring is just around the corner. If you are like me you are anxious to get out and go bass fishing. This largemouth bass fishing techniques article will point out some tips and strategies for early spring bass fishing.

As warmer, spring weather approaches and the water temperature in your favorite fishing spot starts to rise there are or will be a lot of changes going on in the environment that bass live in. Algae will begin to bloom and weeds will start to grow again. As this change starts to take place bait fish, crayfish, aquatic insects, frogs, and all the critters that bass like to eat will move from their winter refuges to shallow water and come to life. When this happens the bass will follow and start cruising the shallow flats, bays, coves, and channels looking for food and spawning grounds.

Flats

Early spring is a great time to intercept these cruising bass in shallow water. Look for dark bottom flats, bays, coves, and channels on the north side of the lake or reservoir you are fishing on. The water usually warms up faster on the north side of the lake since it is exposed to more sun during this time of the year. Most of the bass in the lake will be looking for the warmest water available in early spring. Look for areas on shallow flats, bays, coves, or channels that have nice, green and growing weeds. Cast your lures along the insides of these weed lines or weed clumps. Target areas 0 to 6 feet deep.

Minnow or crayfish imitating jigs along with jerk baits or lipless crankbaits work well this time of year. Use smaller lures in early spring and try to "match the hatch." The bait fish and crayfish have not reached their full size yet so try downsizing your lures to give the bass a more natural presentation. This will also require you to downsize your line a size or two to give your lure the best action possible. Don't be afraid to let your lure go down into or graze the tops of the weeds. Try casting a jig or lipless crankbait out, let it sink to the bottom, and then pull it through or rip it out of the weeds, then let it sink to the bottom again, and repeat. This technique can provoke some pretty aggressive strikes during early spring.

Find the warmest water available, find some growing weeds in shallow water, downsize your lures and you will have found some valuable largemouth bass fishing techniques for catching early spring bass.

Largemouth Bass Fishing Techniques - Early Spring Bass Fishing!

If you're interested in learning more largemouth bass fishing techniques please visit largemouth bass fishing techniques or http://www.squidoo.com/largemouth_bass_fishing_techniques.